About the rubber and plastic sponge board has seven effects

About the rubber and plastic sponge board has seven effects

1, low thermal conductivity: thermal conductivity is an important indicator of the effectiveness of insulation materials, the lower the thermal conductivity, the better the thermal insulation performance. When the average temperature is 0 °C, the thermal conductivity of the material is 0.034 W/mk, and its surface heat release coefficient is high. Therefore, under the same external conditions, the product with the relatively thin thickness can achieve the same traditional insulation material. effect.

2, good flame retardant performance: According to the "Code for Fire Protection of Building Design" and "Code for Fire Protection Design of High-rise Civil Buildings", the insulation materials used for pipes and equipment must be non-combustible or non-combustible materials. The material contains a large amount of flame-retardant and smoke-reducing raw materials, and the smoke concentration generated during combustion is low, and the fire ball does not melt when it does not melt, and the material has self-extinguishing characteristics.

3, good seismic performance: rubber and plastic insulation materials have high elasticity, which can greatly reduce the seismic and resonance of chilled water and hot water pipelines during use.

4, closed-cell foaming, good moisture resistance: rubber and plastic insulation board has a perfect closed-cell foam structure, all of which are independent of each other. The air bubbles that are not connected to each other form a closed air layer, which effectively improves the thermal insulation performance of the product. At the same time, the independent closed bubble structure can form multiple barriers to the water vapor molecules, and even if the surface of the material is damaged, the water vapor can be prevented from penetrating into the interior of the material to maintain The product insulation effect is stable for a long time.

5, good flexibility: rubber and plastic materials have good bypass and toughness, easy to handle curved and irregular pipes during construction, and can save labor and materials

6, easy to install, beautiful appearance: due to the softness of this product, easy to install. Pipe installation; can be installed after being installed, or the pipe can be cut longitudinally and then glued together. For complex parts such as valves, tees, elbows, etc., the plates can be cut and bonded according to different shapes to ensure the tightness of the whole system, thus ensuring the thermal insulation of the entire system. Because of the smooth and flat rubber surface and the excellent performance of the material, it does not need to add a gas barrier layer, a protective layer, reduce the trouble in construction, and ensure the appearance is beautiful and smooth.

7, other advantages: rubber and plastic insulation board is very safe to use, neither irritating the skin nor harming health. They prevent mold formation, acid and alkali resistance, and superior performance. These properties make rubber and plastic an ideal insulation material for protecting pipes from corrosion due to atmospheric media or industrial environments. Easy to install, beautiful appearance Because of the softness of this product, easy to install.