Autumn is good, and the insects can be productive in the coming year.
Core Tip: There are a large number of old larvae of cotton bollworm in crop fields such as corn, vegetables and cotton. During the harvesting process, most of the cotton bollworms fell into the soil and became phlegm and winter. If these cotton bollworms can successfully winter, they will bury hidden dangers for the outbreak of cotton bollworm in the coming year. Therefore, it is an urgent task to grasp the autumn turn and reduce the overwintering insects such as cotton bollworm, ground tiger, aphid and spider mites. It is better to turn the depth early The autumn turn should be carried out early after the autumn harvest, so that there is sufficient time to ensure the soil ripening, which is conducive to the accumulation of soil in the late autumn, the establishment of soil tillage reservoirs, and the use of autumn and spring. If the ploughing is too late, it will cause too much and too much surface soil, and reduce the quality of ploughing. This will not only be detrimental to soil ripening, but also affect the quality of spring sowing. The depth of autumn turning is generally 25-30 cm. Pay attention to soil moisture The soil moisture content is suitable. After turning over the soil, the soil is finely broken and well preserved, and the resistance to the ground is small and the work efficiency is high. If the soil moisture is too large, it will easily form a sticky strip after turning over, and it will become a dead clods after drying. Even if it is grounded many times, it will be difficult to smash and not be preserved. The soil is too dry, the resistance to the ground is large, the work efficiency is low, and the quality of the farming is poor. Autumn turning should give priority to ploughing soil-heavy plots to achieve loose soil and accelerate soil ripening. For the sandy soil with light soil texture, it can be turned over or taken every other year, which is more conducive to water storage and conservation, and at the same time, it can save investment in machine farming operations. Autumn turns to be combined with winter irrigation The autumn turn can turn most of the wintering pests and germs of the farmland to the lower soil layer, destroying the wintering place and making it unable to winter. Winter irrigation can make the water in the soil saturated, so that the pests in the soil layer will suffocate and die, thus greatly reducing the wintering base of the pests. Therefore, it is recommended to have water and irrigation conditions, and after the autumn turn, it is necessary to prepare the land for winter irrigation. Winter irrigation is generally carried out before the soil is frozen, probably before mid-November, and can be adjusted according to climatic conditions. Plots with small soil leakage can be carried out at the time of freezing, and reach the freezing with irrigation. If it is sandy loam soil, it can be filled with 70-100 cubic meters per mu, and other soils can be filled with 60-70 cubic meters per mu. Plots with a large amount of leakage should be carried out after freezing. Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
SPA-100 Ophthalmic A-Scan/Pachymeter with macular recognition function, can accurately measure axial length, anterior chamber depth, lens thickness, as well as intra-ocular lens calculation.
A scan probe: 10MHz import small size probe, built-in luminotron
P scan probe: 20MHZ, angle of 45 degrees makes easier operation
Others: A/P Ophthalmic Scanner,Eye Ultrasound Scanner A Probe,Ophthalmic With Pachymeter Ap Probe,A Ophthalmic Diseases Check Ultrasound Guangzhou Sonostar Technologies Co., Limited , https://www.sonoeye.com
And also with the central area and the peripheral areas gain automatic compensation capability, accurate measurement of central and peripheral corneal thickness, is widely used in the preoperative examination and postoperative effect evaluation of refractive surgery.
Measuring range: 15mm-40mm
Measurement precision: ±0. 05mm; with macula lutea trace function
Measurement: Anterior chamber depth, lens thickness, vitreous body length, total length and average
Method of measurement: immersion and contact
Eye mode: Phakic/ Aphakic/Dense/ various IOL
IOL formula:SRK-II.SRK-T.BINKHORST- â…¡.HOLLADAY.HOFFER-Q.
HAIGIS
Enter the name & ID; easy to check archive
Storage: 10 cases, 5 readings each case
Output: A scan waveform and IOL calculation sheet
Resolution: 5um
Measuring range: 150um~1500um
Display: SINGLE mode and MAP mode
Can display ultrasound waveform when measuring
Each group is the average of 20 measurements
Switch between IOP measured value and actual value
Can input name, ID and operator`s name
Large color liquid-crystal screen
Touch screen input, easy operation
Curve freezing: Manual/Auto mode, controlled by pedal
Built-in speed thermal printer