Hx112b High Frequency Mobile C Arm X-ray Machine
Jewelry Safes,Jewelry Safe,Best Jewelry Safe,Jewelry Safe Box Hebei Yingbo Safe Boxes Co.,Ltd , https://www.yingbosafes.com
Â
Â
HX112B can be used on: Orthopedics: restore bone translocation, reset, fixing Surgery: remove foreign matters, implantable pacemakers.
Â
Features of c arm machineÂ
1,With a compact appearance, and easy to operate
2,Unique base electric auxiliary support arm design, it's more security for using.
3 A unique hand-held controller design, convenient to operate
4, With a high-quality knockdown X-ray generator to reduce radiation
5,With the Perspective KV,MA automatically track fluoroscopy to make the image brightness and clearness optimum
6,Toshiba image intensifier, the quality is stable and reliable, a good image clarity
7,Clinical Video system with high performance,8 images storage  volume, and two 14"high-resolution monitors
8,Installation of dense grain grids, to further enhance image sharpness,
Â
Â
Fluoroscopic Capacity
Max rated capacity
5.0 kW
Â
Max rated fluoroscopic capacity
Tube Current 4mA; Tube Voltage 120kV
Â
Automatic Fluoroscopy
Tube Voltage: 40kV~120kV adjust automatically
Â
Tube Current: 0.3mA~4mA adjust automatically
Â
Manual Fluoroscopy
Continuous tube Voltage: 40kV~120kV
Â
Continuous tube Current: 0.3mA~4mA
Â
Pulse Fluoroscopy
Continuous tube Voltage: 40kV~120kV
Â
Continuous tube Current: 4.1mA~8mA
Â
Tube Voltage, mAs
40kV~120kV 20~100mA 1~180mAs
Â
Plate hole size
200mm×250mm(8"×10") or 250mm×300mm(10"×12")
Â
X-ray Tube
X-ray tube special for High Frequency
Large focus:Â 0.6, small focus:Â 0.3
Â
Inverter Frequency:Â 40kHz
Â
Thermal capacity:Â 150kJ (200kHU)
Â
Video System
Image Intensifier
Image Intensifier made by TOSHIBA (9")
Â
CCD vidicon
Imported CCD Vidicon with ultra-low luminosity
Â
Monitor
Horizontal 1000 lines and vertical 800 lines, Bandwidth:Â 12.5MHz, Image/sec:Â 25
Â
CCU (central control)
Recursive filter:Â K=8, 7 images storage, image upright, image overturn, positive & negative image; LIH(last image freeze, and OSD(monitor display)
Â
Â
Structure
Direction-wheel
±90°revolution, can change the moving direction of the unit.
Â
Ascending & descending range of pillar
≥400mm
Â
C-arm
Forward and backward movement: 200mm
Â
Revolution around horizontal axis: ±180°
Â