Tips for prolonging the service life of high and low temperature alternating test chambers

High and low temperature alternating test chambers are used in various fields. As the use of more and more widely, the occurrence of glitch is gradually more and more exposed. Then the loss of the high and low temperature alternating test chamber is unavoidable. How to maintain the high and low temperature alternating test chamber to minimize this loss? Bao Yitong summarized the following 6 points:

1, high and low temperature test chamber is preferably carried out at To move the guidance of the art, to avoid unnecessary damage to refrigerant leakage or the like.

2, recommended alternating high and low temperature test chamber disposed more benign environment, the optimum temperature and humidity of the environment: 5 ℃ ~ + 30 ℃ ≤ 85% R. H. For laboratories that do not have this condition , an appropriate air conditioner or cooling tower must be provided . In order to ensure the life of the compressor and the overall experimental results of the machine.

3, waterway and humidifier cleaning : If the water path is not smooth, the humidifier scaling is likely to cause the humidifier to dry , may damage the humidifier , so the waterway and humidifier must be cleaned regularly.

4, circulating fan, condenser fan cleaning and balance : similar to the cleaning evaporator , because the working environment of the test box is different , the circulating fan and condenser fan will condense a lot of small particles such as dust , should be cleaned regularly .

5, regularly alternating high and low temperature cleaning chamber, ensure good ventilation performance of the heat exchanger, using water for cooling the compressor, which in addition to ensuring the required water pressure and water temperature, but also must ensure the appropriate flow. The inside of the condenser is periodically cleaned and descaled to obtain its continuous heat transfer performance.

6, long-term use of the inner wall should be clean, dry, each half-day to the device through it once, for no less than one hour.

This is the 6 points of operation and maintenance precautions for high and low temperature alternating test chambers . As long as you pay attention to these maintenance tips when you use them normally, it not only improves efficiency, but also prolongs the service life of high and low temperature alternating test chambers.