High and low temperature impact test chamber defrost setting
When the high and low temperature impact test chamber is used for rapid high and low temperature impact test, there will be frost on the compressor and the observation window. The observation window is better treated. In the case of the partition glass, there is a layer of 17V conductive film which is heated. The phenomenon of frost formation is prevented, and there is a light on the observation window, which has a certain effect on the defrosting, but the compressor defrosting of the high and low temperature impact test chamber requires several steps. We are a professional Chinese supplier of Vision Protection Material; we supply various products of Eyedrops Material and Eye Pad Material; and we can providing product images and basic parameters with each Eye Care Material, such as Lutein Powder,Blueberry Extract,Anthocyanidin Powder. Look forward to your cooperation! Eye care Material,Eyedrops Material,Lutein Powder,Blueberry Extract,Anthocyanidin Powder Xi'an Quanao Biotech Co., Ltd. , https://www.quanaobiotech.com
High and low temperature impact test chamber defrost setting
Automatic defrost setting: You can set the defrost start condition according to the required test content, for example, defrost every 100 times, or according to the time you need, you can also turn off the defrost mode. . (It is recommended to set the number of times as the main, and use 120 times as the upper limit. If it is not necessary, please do not exceed 120 times. The amount of frost will affect the performance of the low temperature zone.)
Start back: You can set the number of times or time you need with the number of times the program is done in the program or the length of time (when you start the condition is set to time).
Defrost end temperature: You can set the defrost temperature you need. The higher the temperature, the longer the defrost time, but the defrost effect is better. (It is recommended to use 10 °C for your defrosting temperature to get the best balance of time and effect)
Defrost delay time of high and low temperature impact test chamber: When the defrost temperature you set reaches, the defrost delay time starts to calculate. It is generally recommended to set it to 5~10 minutes.